7. Charge Information (For PMR-121TX-2CH)
6
CLIP SPRING
RELEASE TAB
BELT CLIP
BATTERY COVER
COVER ARROW
POSITIVE
TERMINALS
1. Using thumb, press down on battery cover at arrow and slide cover down.
2. Then lift cover at bottom to open. Remove cover.
3. Insert three AAA batteries (positive (+) end toward the top begining
at left side and alternating positive terminals as shown).
INPUT : 230VAC
OUTPUT : 6VDC
NOTE:
Only TTI approved rechargeable batteries
can be recharged in the radio transceiver.
Battery installation is made more convenient when the belt clip is
either rotated left or right to the horizontal position, or is removed.
simply rotate the clip in either direction to the horizontal position.
Be careful not to use excessive force. To remove the clip, press
down on the spring release tab and pull the clip straight out from
the radio body.
6. Installing the batteries
CHARGING STAND POWER JACK
DESKTOP CHARGING STAND
CHARGING COMPARTMENT
LEDs(2): RED---CHARGING
PMR RADIO CHARGING
COMPARTMENTS(2)
