Start piloting your Seawolf.
Find a good launch location, with the possibility to stand stable with no risk of falling into the water. The water
surface should be easily reachable and must not be too low. Becareful with tide.
Insert the handle into the holes of the external hull. Be sure that the hooks are connected to the metal rod of
the inner hull and not only to the outer plastics .
Lift the sub and gently place it into the water.
Wait until the front hood and the rear cone are totally full of water. These are free-flood compartments and it’s
normal they become totally full of water, no large air bubble should remain inside them.
At this point, disconnect the handle.
07
NOTE: Pay attention not to let the handle fall into the water, it will sink!
