Pattern view
After power on, 6equencer defaults to pattern view. This is
indicated by the
PAT
led lit up in blue. Pattern view can be
used to program patterns and most live performance tools
are also available here.
Active steps are shown by the red being on.
For inactive steps the red led is off.
When the sequencer is running, the current position is
indicated by a short blink in red if the step is off, or
alternatively if a step is on, the red led briefly turns off.
Selecting the active instrument
The currently active instrument is indicated by a blue led.
To change the instrument press FUNC and the instrument
button. Alternatively you can long-press an instrument to
make it active. Once an instrument is selected, the active
steps for that instrument are displayed in red.
Programming a pattern
To set or delete a step, just press the corresponding step.
When a step is activated, the red led lights up.
Tubbutec 6equencer user manual – page 10
