CLEAR steps
While the sequencer is running, press FUNC +
CLEAR
to
clear the current step of the currently selected instrument.
The mode is immediately deactivated when releasing the
FUNC button.
MUTE instruments
A handy performance tool is the mute mode. Here you can
activate and deactivate instruments while the sequencer is
playing and without modifying the patterns.
To enter MUTE mode, press FUNC +
MUTE
. The blue
MUTE
led will light up.
In mute mode, the 8 instrument’s leds will light up in red
when active, or be off if the instrument is muted. Pressing
each of the instrument’s buttons will switch between the
muted and active states.
Whenever the instruments are triggered, the leds will shortly
flash as additional optical feedback.
The other eight, non-instrument buttons control the
probability (see Probability control).
To exit MUTE mode, press FUNC .
Mute acts on all patterns globally and is not saved.
Tubbutec 6equencer user manual – page 14
