Table 1
UNDER NO CIRCUMSTANCES SHOULD AN UNQUALIFIED PERSON REMOVE
THE COVERS OF A CD PLAYER.
Maintenance - 13
No Power when the POWER button is
depressed.
Disc play does not start
Program Mode does not function
Unit is ON and playing but no sound
Sound is skipping
1.
Check you have pushed the IEC mains cable
firmly into the socket on the rear panel.
2.
Check that MASTER POWER switch on the rear
panel is in the ON position.
1
. Ensure the CD is the correct side up, & is clean
1.
The player is in PLAY mode, press STOP
1.
The unit could be in mute mode, wait 30 seconds
and try again.
1.
Ensure the player is not being vibrated by
loudspeaker etc..
2.
If problem persists the disc is most probably
damaged
Symptom
Remedy
Troubleshooting
