Self Loading Balefeeder BF5000SL
-
Section 5: Operation 5-1
Section 5: Operation
Loading Bales
1. With rear fork assembly down reverse the
unit and pierce bale.
2. Apply hydraulic pressure to loading arm
circuit, lifting the bale onto the bed.
3. If bale has plastic or net wrap covering it
can be easily removed once the bale is off
the ground.
4. After bale is on bed, retract the loading arm
cylinder which will lower the bale fork into
loading position for the next bale.
Summary of Contents for BF5000SL
