1-4
Section 1 - Safety -
Nitro 275RS
12. Where possible avoid operating the Nitro
Manure Spreader near roads, ditches,
embankments or holes. Reduce speed
when operating on rough, slippery, or muddy
surfaces and when turning or crossing slopes,
Stay off slopes too steep for proper operation.
13. Beware of the machine size and have enough
space to allow for operation. Never operate
the Nitro Manure Spreader at high speeds in
crowded places.
14. Do NOT use attachments unless the
attachments are approved optional
equipment.
15. Securely fasten your seat belt before
operating the machine. Always remain seated
when operating the machine.
Equipment Safety Guidelines
1. Safety of the operator and bystanders is
one of the main concerns in designing and
developing equipment. However, every year
many accidents occur which could have been
avoided by a few seconds of thought and a
more careful approach to handling equipment.
You, the operator, can avoid many accidents
by observing the following precautions in this
section. To avoid personal injury or death,
study the following precautions and insist
those working with you, or for you, follow
them.
2. In order to provide a better view, certain
photographs or illustrations in this manual
may show an assembly with a safety shield
removed. However, equipment should never
be used in this condition. Keep all shields in
place. If shield removal becomes necessary
for repairs, replace the shield prior to use.
3. Replace any safety sign or instruction sign
that is not readable or missing. Location of
such safety signs are indicated in this manual.
4. Never use alcoholic beverages or drugs
which can hinder alertness or coordination
while using this equipment. Consult your
doctor about using this machine while taking
prescription medications.
5. Under no circumstances should young
children be allowed to work on this equipment.
Do not allow persons to use or assemble this
unit until they have read this manual and have
developed a thorough understanding of the
safety precautions and of how the machine
works. Review the safety instructions with all
users annually.
6. This equipment is dangerous to children and
persons unfamiliar with its operation. The
operator should be a responsible, properly
trained and physically able person, familiar
with machinery and trained in this equipment’s
operations. If an elderly person is assisting
with work, their physical limitations need to be
recognized and accommodated.
7. Never exceed the limits of a piece of
machinery. If its ability to do a job, or to do it
safely, is in question
- DON’T TRY IT.
8.
In addition to the design and configuration
of this implement, hazard control and
accident prevention are dependent upon the
awareness, concern, prudence and proper
training of personnel involved in the operation,
transportation, maintenance, and storage of
the machine.
THINK SAFETY! WORK SAFELY!
Summary of Contents for Nitro 275RS
