Operation
33
5
Operation
Foot contact switch
The drive circuits of the working hydraulics are disabled by a
safety valve and are only enabled by operating the foot contact
switch (1). The foot contact switch must also be operated if the
machine is to be driven in the second drive position.
1. Operate the foot contact switch (1) in order to activate the
working hydraulics or the second drive position.
000003
1
Lift / lower control lever
NOTE!
The terms "outwards" and "inwards" are used as
follows for the description of the lever operation:
Outwards
= The lever is moved outwards, away
from the driver's seat.
Inwards
= The lever is moved inwards, towards
the driver's seat.
The lift / lower control lever (1) is used to raise or lower the
accessory equipment.
Do not move the lever jerkily.
1. Operate the lever (1) over the notch outwards.
The accessory equipment lowers. The lever remains in this
indexed position or floating position. The accessory equipment
follows the contour of the ground.
If the lever is not pressed outwards until the indexed position,
it goes back to the "0" position automatically.
2. Move the lever (1) to "0" to cancel the floating position.
3. Press the lever inwards.
The accessory equipment is raised. The position does not
have a locking function.
Always lower the accessory equipment to the ground before
you remove yourself from the machine.
000023
1
