KabuKlip
Operating Manual v1.2 - Page 9/17
www.tuchler.net
June 2014
Table 7: Overview of the maximum cable lengths
5.
Areas of use of the KabuKlip system
A KabuKlip system consists of at least one KabuKlip controller, one KabuKlip release
unit and one 4-pole 1.5 mm² connecting cable.
The system is used:
to drop curtains, fabrics, foils or other backdrops without eyelets or any other
prepared edges. This is done either by clamping only or by some kind of
positive engagement.
to drop decorations using the release eyelet.
Lifting persons or animals is prohibited.
The warnings (Section 2) must be obeyed absolutely.
6.
Mechanical mounting of the system
The KabuKlip release unit must be securely fastened to a permissible mounting point
(pipe hook or clip) with the M12 x 20 hexagonal socket screws provided. Use the
M12 T-nuts provided for this.
After fastening, the KabuKlip release units must be properly secured using the
integrated steel safety clip.
The control line from the control unit to the first KabuKlip release unit in particular must
be free of any tension. Faulty or damaged plug connections can lead to a power loss
and therefore premature release of the load.
number of
Kabuklip´s
30
40
50
60
70
80
90
100
110
120
130
140
150
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
cable length controller to 1.Kabuklip [m] (1,5mm²)
Summary of Contents for KABUKLIP
Page 1: ...Operating Manual English v1 2 ...
Page 17: ......