Additional Modules
A second module can be connect to the first by
removing the sealing bung in the right hand
side outlet socket of the primary module and
pushing the plug of the second module into the
socket. Listen for the audible “click”.
Disconnect power before making this
connection (5).
Inserting a flat blade screwdriver into the slot
inside the cover can separate the connector on
the right hand side of the Safepod module.
Disconnect the power before connecting or
disconnecting the plugs and sockets.
The second module must also be secured to a
rigid surface (6). A third module can be added
in a similar manner. Ensure that the power
consumption does not exceed 10 amps.
The socket in the timer module is only live
when the timer is on. The socket can be
switched off using the switch adjacent to the
socket. The
red light will
indicate
when power
is connected
to the
Safepod.
Extension
Cables
An extension
lead can be used to position a second or third
module in a
different
location from
the primary
Safepod
module. Leads
can be
connected
together (7 &
8) using the
sealed
waterproof
connectors to extend the range of the Safepod
modules. Ensure that the power is off and the
connectors are dry when making any
connection. Listen for the audible “click” to
ensure a waterproof connection.
Astralux Dynamics Ltd,
Red Barn Road, Brightlingsea, Essex CO7 0SW, United Kingdom
Tel: 08700 278 725 • Email: info@astralux.co.uk • Web:www.astralux.co.uk
5
6
7
8
This product must not be discarded with general household waste.
Private Households may return electrical and electronic equipment to
designated collection facilities for material recovery and recycling.
TuControls Limited
15/16 Jubilee End, Dale Hall Industrial Estate, Lawford, Essex. CO11 1UR. United Kingdom
Tel: 01206 395661 E-mail: safepod@tucontrols.com Web: www.tucontrols.com
