Software Installation
1.
Copy the software ISCapture installer to the PC. Double-click on it
to start the installation. Follow the [Next] button to finish the
installation.
2.
After finish the installation, a software shortcut
will be
created on the desktop.
Note:
If previous version ISCapture was installed in your PC, the
installer will automatically detect it and ask to remove it first before
install the new one.
If the previous installed ISCapture is still running, it will ask to close
the software and then start the installation.
Start ISCapture
1.
Connect the camera to the PC. Be sure the driver is already
installed properly.
2.
Double-click the ISCapture shortcut
to start the software.
3.
Software will automatically detect the device and start the
preview.
