22
21
CHARGING
!
!
!
!
Ampere
meter
Constant:
Displays approximate scale of charge
during the first 80%.
Flashing:
High internal charger temperature.
Charging speed is reduced
80%
Constant:
First 80% charged, the last 20% will go
more slowly
Flashing:
Contact your service supplier
100%
Constant:
Fully charged
Flashing:
Charging almost complete, finishing
Charger
turned
on
Constant:
AC power good
Flashing:
Low AC Voltage, check voltage and ex
-
tension cord length
Error
Flashing:
Charger error. Reset charger , contact
your service provider
The charger display
Green
Constant: Fully charged
Flashing:
Short: <80% Charge
Long: >80% Charge
Not constant: Contact your
service supplier
Yellow
Flashing:
Reduced Power Mode: Low
AC Voltage or High internal
charger temperature. Use a
shorter extension cord
Red
Flashing:
Charging error. Re-plug the
charger plug in the socket or
contact your service supplier
Dashboard charging LED
The e-Tuk’s standard charger is located underneath the rear bench. It has a display on which you
can check the progress of the charging sequence. Cutting off an unfinished charging sequence
will lower your battery lifetime. When the green 100% battery charge light turns on, the charging
sequence is complete.
If you do not need detailed charging information, but just want to know if the charging sequence
is finished, you can easily check the charging LED on the dashboard. It is located next to the
key switch.
Battery
LO
C
K
LO
C
K
LO
C
K
