22
CHARGING STANDARD CHARGER
!
!
!
!
Ampère
meter
Solid:
Displays approximate scale of charge
during the first 80%.
Flashing: High internal charger temperature.
Charging speed is reduced
80%
Solid:
First 80% charged, the last 20% will go
more slowely
Flashing: Contact your service supplier
100%
Solid:
Fully charged
Flashing:
Charging almost complete, finishing
Charger
turned
on
Solid:
AC power good
Flashing: Low AC Voltage, check voltage and ex-
tension cord length
Error
Flashing: Charger error. Reset charger pocontact
your service provider
The Charger display
The eTuk’s standard charger is located underneath the rear bench. It has a display on which you
can check the progress of the charging sequence. Cutting off an unfinished charging sequence
wil lower your battery lifetime. So, waiting for the 100% green light to turn on is the best thing
to do.