30
Jacking
Changing tires
Never jack up the ve-
hicle on the diagonal
beam near the rear
axle. This can dam-
age the suspension.
Jack up the vehicle
only underneath the
rear suspension spring
or rear axle.
To change one of the rear tires, first jack
up your vehicle. Remove the screw of the
plastic wheel cover. Then, remove the 4 nuts
that hold the wheel in place. Take off the
wheel. Make sure you put the new wheel in
place and secure the bolts while the vehicle
is still jacked up.
Use a threadlocking material on all the bolts
before putting the new wheel back in place.
We advice using Loctite Blue 242 Nut & Bolt
Locker.
To change the front tire, first jack up the
vehicle. Remove the brake caliber and loosen
the bolt of the front axle. Remove the front
axle to release the front wheel. Pay attention
to the right assembly order of the several
spacers and other parts. Reassemble in the
opposite order of removal.
Only jack up the vehicle
on the allocated jack-
ing points. These are
the cylindrical blocks
underneath the frame.
TROUBLESHOOTING
