35
29
The
motor
temperature
sensor is not connected. The
vehicle will not drive.
The motor temperature
sensor is loose.
Check the 2 pin connection by
the motor.
36
Encoder error.
The encoder is loose.
Check the 4 pin connection by
the motor.
37
The motor face is open.
Vehicle shuts down.
There was a short circuit in
the wiring of the motor.
Check the wiring of the motor.
38
The main contactor is welded
shut. Vehicle shuts down.
The main contactor does
not open anymore.
Replace the main contactor.
39
The main contactor did not
close. Vehicle shuts down.
The main contactor did
not close or the tips are
oxidized.
Check pins on contactors or
replace main contactor.
44
There is an error in the
throttle.
The throttle broke or the
wiring is faulty.
Check wiring on the throttle,
or replace throttle.
47
Vehicle will not drive while
direction switch is in D or R.
You started the vehicle
without
putting
the
direction switch in neural.
Shut down the vehicle, put
the direction switch in neural
(N) and start it again.
73
Stall detected. The motor is
stalled. The vehicle will not
drive.
Something blocks the mo-
tor and prevents it from
turning.
Check if something is block-
ing the motor, wheels or drive
train. Check the 4 pin con-
nection on the motor. The
driving angle is too steep.
Maintenance
