![background image](http://html1.mh-extra.com/html/tum-electronic/mlb1006/mlb1006_user-manual_1179838013.webp)
MLB1006 Serisi
- 9 -
1.2 Display
1. Zero status indication, Displayed when the scale is at the centre of its zero band.
2. Tare status indication, Displayed when the weight has been tare.
3. Simple counting indication, Displayed when the scale is in simple counting mode.
4. Unit indication, Displayed when the scale is in g or lb unit.
5. Kg indication, Displayed when the scale is in kg unit.
1.3 Keypad
ZERO KEY
:
This key is
ZERO
key; in the menu use as
“UP“
key
l
When the weigh pan is empty (free of load) and the display is not showing zero,
press the
“ZERO”
key to zero the scale.(The weight can be zero is only at the 2%
of Max. capacity)
TARE KEY
:
This key is
TARE
key; in the menu use as
“RIGHT“
key
l
The tare function will not operate during the following conditions:
(1) When the scale powers on if the weight is negative and after a container is
placed on the weigh pan if the weight is still below zero.
(2) The tare value is over the full scale capacity.
UNIT KEY
:
This key is
UNIT
key
l
Use this key to switch between kg and g or lb units.
1
2
4
3
5
FUNC
UNIT
TARE
ZERO
U
0
T