![background image](http://html1.mh-extra.com/html/tum-electronic/mlb1006/mlb1006_user-manual_1179838015.webp)
MLB1006 Serisi
- 11 -
objects are put on pan and the scale is stable.
2. Take off the object and press
ZERO
key the until back to zero .
l
Press FUNCTION key to exit HOLD mode and move back to weighing mode.
1.4.3 Accumulation Mode
1.
Press
FUNCTION k
ey three times, display shows:
Press
key to confirm.
When choose this mode, user needs to press
key after the objects are put on pan and
the scale is stable to accumulate the data; take off the object and wait until zero, then put other
object to continue accumulate data.
4. Press
UNIT
key to overview the total accumulated numbers and total accumulated weight;
display will shows total accumulated numbers then shows the total accumulated weight.
5. Scale will back to accumulation mode after
showing the total accumulated numbers and
weight.
l
Press FUNCTION key to exit accumulation mode and move back to weighing mode.
1.5 Power Supply
POWER SELECTION
1. 6V4Ah rechargeable battery 2. 110V or 220V AC/DC adaptor
POWER CONSUMPTION
1. Approximately DC 17mA (Scale)
2. Approximately DC 37mA (Scale + Display backlight)
Chapter II Advanced functions
2.1 Checking battery voltage
When scale is on and at zero and stable, long press
ZERO
key around 3-5 seconds(beeper
sounds) then release the key, display sill shows the battery voltage for 3 seconds ten back to
weighing mode.
ACC