Pairing Failed
Pairing failed twice or not connected for more than 1 minute, automatically exit the
pairing mode.
Notes:
1.In order to protect the hearing development of baby, The decibel of sound is
intentionally locked.
2. The product does not support mobile phone calls and call speakers, only support audio
play.
3. The product does not support connect two devices at the same time.
The Upper Part is Connected to the Lower Part (Button KB)
Power Saving & Turn Off Automatically
If no operation within 5 minutes, it will enter into sleep mode automatically, press any key
to active.
If no operation within 25 minutes, it will turn off automatically.
Battery installation method
1 .Confirm that the toy's power is turned off.
2. Locate the battery cover on the bottom of the toy and loosen the screw with a
screwdriver.
3. According to the instructions in the battery box, install four new 1.5V "AA" batteries into
the musical mobile toys.(Recommended to use a new alkaline battery to get the best
performance from the product).
4. Replace the battery cover and tighten the screws.
Battery Notices
1.The crib hanging toy uses 4*1.5V "AA" non-rechargeable batteries.
2.The battery should be taken out and loaded in accordance with the polarity and voltage
signs on the toy battery box. The battery should not be short-circuited.
3. Non-rechargeable batteries cannot be charged.
4. Different types of batteries or old and new batteries cannot be mixed to use.
5. Only the same or equivalent battery as the recommended battery can be used.
6. The used battery should be taken out of the toy. If it is not used for a long time, please take
out the battery in the toy.
7. The power terminals must not be short-circuited.
8. Cannot connect to more than the recommended number of power supplies.
WARNING
●
From birth to 5 months.
●
The toy is intended to be assembled by adult.
●
To be used under the direct supervision of an adult.
●
Possible entanglement injury. Keep out of baby’s reach.Remove mobile from crib or playpen
when baby begins to push up on hands and knees.
●
Attach this toy out of the reach of the child. To prevent possible injury by entanglement,
remove this toy when the child starts trying to get up on its hands and knees in a crawling
position.
●
Remove the cord loop before giving the rattle toys to a child - finger injury hazard.
●
A crib mobile is intended for visual stimulation and is not intended to be grasped by the child.
●
If attached to the crib or playpen, remove when baby begins to push up on hands and knees.
If so designed, mount on wall or ceiling clearly out of a standing baby's reach.
●
If mounted on a wall or ceiling, install the mobile clearly out of a standing baby's reach.
●
Always attach all provided fasteners (strings, straps, clamps, etc.) tightly to a crib or playpen
according to the instructions. Check frequently.
The
crib hanging toy
s uses
4 x AA batteries
(Not included in the package)
11
Summary of Contents for TM18 Series
