10
6.1
Placing the monitor in the cab
The Agrocont monitor is designed to be used only in tractors with a cab. Over the
course of the season of use, it is recommended to leave the monitor in place in the
cab. When a seeder or seeder fertilizer is detached from the tractor, you should not
disconnect anything except the data cable from the back of the tractor.
The best position for the monitor in the cab depends on the tractor and on the user’s
preference. Usually, the best position is either to the right or right-front of the driver.
When placing the monitor in the cab, you should consider various factors, such as
sunlight, which, when shining directly on the monitor, makes it more difficult to read.
Although Agrocont is not sensitive to electromagnetic radiation from outside, you
should use or keep any mobile phones and other transmitters away from the control
system’s monitor and cable.
Proper installation of the monitor in the cab makes it easier to use the monitor.
Figure 5. Monitor stand
Figure 6. Monitor positioned inside a tractor
