4.2 Pairing
R.A.E. is designed to stream media wirelessly from Bluetooth audio devices, such as
smartphones, tablets or personal computers. To do so, the headphone and device (source)
must first be paired.
1.
The first time you switch on R.A.E., Bluetooth pairing mode will be enabled
automatically and the indicator will blink in blue and red sequentially.
If pairing mode is not enabled or to force entering pairing mode manually, press and
hold the power button for 5 seconds when R.A.E. is powered off until the status
indicator blinks in blue and red sequentially and you head pairing from the voice
prompt.
2.
Ensure the Bluetooth feature is enabled on the audio device, R.A.E. will appear in the
discovery list, select to pair.
3.
The indicator will blink in blue slowly when pairing is successful, and you will head
TUNAI R.A.E. is paired as a voice prompt.
R.A.E. will remember up to eight paired Bluetooth devices.
Note: R.A.E. will automatically exit Bluetooth pairing mode if no device is paired within 5
minutes. If pairing fails, the indicator will rapid blink in blue, please try pairing again.
Diagram 5. Bluetooth pairing
