CLEANING LINE
FIGURE 10
Care
21
20
Care
Insert the line at the connector end where the tube attaches to the pSAp
case and push out through the tip.
(FIguRe 10)
Do not rinse or submerge these parts in water.
There is a risk
of damage if a water drop becomes trapped in the tube. If this should
occur, it will prevent sound from coming through the tube and may be
harmful to TuneAmp’s electronics.
Re-attach the tube by aligning the tube connector end with the end of
contact your medical professional.
Care and Storage
The tube and tip need to be changed periodically, typically 2 or 3
times per year. When the tube or tip become soft, discolored, kinked, or
damaged, obtain replacements from your TuneAmp retailer.
When you change the tip, make sure it is securely fastened to the sound
tube before inserting in your ear.
The most common causes of pSAp failure are moisture and wax. pSAps
are exposed to moisture in the form of humidity and perspiration while
being worn. The daily use of a Dry & Store
®
appliance is recommended.
Dry & Store products may be purchased from your retailer or at
www.dryandstore.com
the pSAp case, then
push the tube
straight onto the sound post until
it snaps into place
. There is no
need to rotate the tube when
re-attaching.
The materials used in TuneAmp are
of the highest quality available,
and the likelihood of an allergic
reaction is slight. If the tube or the
tip irritates your ear in any way,
