Tünkers 8-Channel Motor Terminal
for controlling maximum 8 electronic clamping devices
TMI8 V2.1
Subject to technical alterations
Page -5-
06/03/2018
TÜNKERS
®
Maschinenbau GmbH Am Rosenkothen 8 • D-40880 Ratingen Tel. 02102 4517-0 • Fax 02102 445808 Internet www.tuenkers.de
4.3
Display LEDs for electric clamp 1 … 8
16 yellow LEDs for displaying the position Close or Open for clamp 1 -8
8 red LEDs for displaying an error for clamp 1 - 8
Function error LED:
Off
no error at the respective clamp channel
On
error of the clamp channel (see error code in the display)
4.4 Display LEDs for general binary inputs
4.5 KEBA terminal combination for manual mode
4.6 Connections
XS1:
M12 circular connector 4-pin connector input +24V voltage supply
control voltage (IO, Bus and int. logic)
XS2:
M12 circular connector 4-pin connector 24V voltage
supply control voltage (IO, Bus and int. logic)
XS3:
M23 circular connector (Intercontec series 923) connector 6-pin
for the +24V voltage supply performance level ( Ul)
With connecting cable with quick-release fixture, remove
the rubber sealing ring
XBK:
M12 circular connector 8-pin socket output for KEBA terminal
XA1
– XA8:
M23 circular connector socket 6-pin for controlling the
motors
With connecting cable with quick-release fixture, remove
the rubber sealing ring
Pin no.
Designation
1
+24V
2
+24V
3
0V
4
0V
Pin no.
Designation
1
+24V
2
+24V
3
0V
4
0V
Pin no.
Designation
1
+24V
2
0V
3
4
5
PE
PE
2
1
Pin no.
Designation
1
+24V
2
0V
3
nc
4
nc
5
TxD- (RS422)
6
TxD+ (RS422)
7
RxD- (RS422)
8
RxD+ (RS422)
Pin no.
Designation
1
M+
2
M-
3
free
4
Rid
5
Rid
6
free
BE1
BE2
BE3
BE4
BE5
BE6
BE7
BE8
