Tunturi Cardio Fit B25, User Manual

14

English

- If you experience nausea, dizziness or other 

abnormal symptoms, immediately stop your 
workout and consult a physician.

- To avoid muscular pain and strain, start each 

workout by warming up and finish each workout 
by cooling down. Remember to stretch at the 
end of the workout.

- The equipment is suitable for indoor use only. 

The equipment is not suitable for outdoor use.

- Only use the equipment in environments 

with adequate ventilation. Do not use the 
equipment in draughty environments in order 
not to catch a cold.

- Only use the equipment in environments with 

ambient temperatures between 10 °C and 35 
°C. Only store the equipment in environments 
with ambient temperatures between 5 °C and 
45 °C.

- Do not use or store the equipment in humid 

surroundings. The air humidity must never be 
more than 80%.

- Only use the equipment for its intended 

purpose. Do not use the equipment for other 
purposes than described in the manual.

- Do not use the equipment if any part is 

damaged or defective. If a part is damaged or 
defective, contact your dealer.

- Keep your hands, feet and other body parts 

away from the moving parts.

- Keep your hair away from the moving parts.

- Wear appropriate clothing and shoes.

- Keep clothing, jewellery and other objects away 

from the moving parts.

- Make sure that only one person uses the 

equipment at a time. The equipment must not 
be used by persons weighing more than 110 kg 
(242 lbs).

- Do not open equipment without consulting 

your dealer.

Assembly instructions

Description (fig� A)

Your upright bike is a piece of stationary fitness 
equipment used to simulate cycling without 
causing excessive pressure to the joints.

Package contents (fig� B&C)

- The package contains the parts as shown in  

fig. B.

- The package contains the fasteners as shown in 

fig. C. Refer to the section “Description”

 ‼   NOTE

•  If a part is missing, contact your dealer.

Assembly (fig� D)

 ⚠ WARNING 

•  Assemble the equipment in the given order.
•  Carry and move the equipment with at least 

two persons.

 ⚠ CAUTION

•  Place the equipment on a firm, level surface.
•  Place the equipment on a protective base to 

prevent damage to the floor surface.

•  Allow at least 100 cm of clearance around 

the equipment.

•  Refer to the illustrations for the correct 

assembly of the equipment.

 ‼   NOTE

•  Save the tools provided with this product, 

after you completed the product assembly,  
for future service purposes. 

Use

Unfolding and folding�

Please pull out the lock pin from the joint and fold 
the aluminium rail, then securing by the lock pin.

Adjusting resistance

To increase or decrease resistance, turn the 
adjustment knob at the top of the handlebar 
support tube clockwise (+ direction) to increase 
resistance and counter-clockwise (- direction) to 
decrease resistance.  

The scale above the knob (1-8) helps you find and 
reset a suitable resistance.