Tunturi Cardio Fit C30 Cross, User Manual

Only store the equipment in environments with 
ambient temperatures between 5°C~45°C / 
41°F~113°F.

- Do not use or store the equipment in humid 

surroundings. The air humidity must never be 
more than 80%.

- Only use the equipment for its intended 

purpose. Do not use the equipment for other 
purposes than described in the manual.

- Do not use the equipment if any part is 

damaged or defective. If a part is damaged or 
defective, contact your dealer.

- Keep your hands, feet and other body parts 

away from the moving parts.

- Keep your hair away from the moving parts.

- Wear appropriate clothing and shoes.

- Keep clothing, jewellery and other objects away 

from the moving parts.

- Make sure that only one person uses the 

equipment at a Time. The equipment must not 
be used by persons weighing more than 110 kg 
(242 lbs).

- Do not open equipment without consulting 

your dealer.

Assembly instructions

Description (fig� A)

Your Cross trainer is a piece of stationary fitness 
equipment used to simulate walking or running 
without causing excessive pressure to the joints.

Package contents (fig� B & C)

- The package contains the parts as shown in  

fig. B.

- The package contains the fasteners as shown in 

fig. C. Refer to the section “Description”

 ‼   NOTE

•  If a part is missing, contact your dealer.

Assembly (fig� D)

 ⚠ WARNING 

•  Assemble the equipment in the given order.
•  Carry and move the equipment with at least 

two persons.

 ⚠ CAUTION

•  Place the equipment on a firm, level surface.
•  Place the equipment on a protective base to 

prevent damage to the floor surface.

•  Allow at least 100 cm of clearance around 

the equipment.

•  Refer to the illustrations for the correct 

assembly of the equipment.

 ‼   NOTE

•  Save the tools provided with this product, 

after you completed the product assembly,  
for future service purposes. 

Extra bolts ( Fig F)

The two extra bolts and commencing washers 
on the front side of the upright tube are pre 
assembled to fit an additional tablet holder. 
The tablet holder does not come standard with 
the product, but can be purchased separately as 
an accessory 
Order for Tunturi article number: 16TCFTH010

 ‼   NOTE

•  This accessory does not come standard with 

this product. 

Use 

Adjusting the support feet

The equipment is equipped with 2 support feet. If 
the equipment is not stable, the support feet can 
be adjusted.

- Turn the support feet as required to put the 

equipment in a stable position.

 ‼   NOTE

- The machine is the most stable when all 

support feet are turned fully in. Therefore start 
to level the machine by turning all support feet 
fully in, before turning out the required support 
feet to stable the machine. .

16

English