G B
3
O W N E R ' S M A N U A L
•
C E 3 5
•
The equipment must not be used by
persons weighing over 150 kg.
•
Make sure the equipment is
unplugged before carrying out any
assembly or maintenance procedures.
•
Do not attempt any servicing or
adjustments other than those described
in this guide. Everything else must
be left to someone familiar with the
maintenance of electromechanical
equipment and authorized under the
laws of the country in question to carry
out maintenance and repair work.
•
This product must be grounded. If
it should malfunction or breakdown,
grounding provides a path of least
resistance for electric current to reduce
the risk of electric shock. This product
is equipped with a cord having an
equipment-grounding conductor and
a grounding plug. The plug must be
plugged into an appropriate outlet that
is properly installed and grounded in
accordance with all local codes and
ordinances.
DANGER:
Improper connection of the equipment-
grounding conductor can result in a
risk of electric shock. Check with a
qualified electrician or technician if you
are in doubt as to whether the product
is properly grounded. Do not modify the
plug provided with the product - if it will
not fit the outlet, have a proper outlet
installed by a qualified electrician.
SAVE THIS INSTRUCTION MANUAL
NOTE ABOUT SAFETY
FOR UNITS WITH
ELECTRICAL pOWER
Before connecting the equipment to a
power source, make sure that the local
voltage matches that indicated on the
type plate: the equipment operates at
either 230 v or 115 v (north american
version). Note! The equipment must be
connected to a grounded wall socket.
Do not use extension wires when
connecting the equipment to the power
source. Always switch off the power and
unplug the equipment from the electrical
outlet immediately after using!
To reduce the risk of burns, fire, electric
shock or injury to persons:
1.
The equipment should never
be left unattended when plugged in.
Unplug the equipment from the outlet
when not in use, before carrying out any
maintenance or repair procedures, and
before moving the unit.
2.
Do not operate the equipment
under a blanket or other combustive
material. Excessive heating can occur
and cause fire, electric shock or injury to
persons.
3.
Do not connect the equipment
to a power source, or operate the
equipment if there is any sort of damage
to the power cord or the unit itself.
4.
Do not connect the equipment
to a power source or operate the
equipment outdoors or in damp
locations.
5.
Keep the power cord away from
hot objects.
6.
Do not route the power cord
beneath a carper or place any objects
on the cord. Also make sure that the
power cord does not run underneath the
equipment.
7.
Do not alter (for example
lengthen) the cord between the
transformer and the unit.
NOTE ABOUT
ASSEMBLING THE
EQUIpMENT
Start by unpacking the equipment. The
detailed assembly instructions can be
found at the back of this guide. Follow
the instructions in given order.
Before assembly, check the contents of
the package. If a part is missing, please
contact your dealer with the model,
equipment serial no. and spare part no.
of the missing part. You’ll find a spare
part list at the back of this guide. The
