Tunturi FitCross 50i, User Manual

2 4

English

Explanation Display functions

Time

-

Without setting the target value, time will count up.

-

When setting the target value, time will count down 

from your target time to 0 and alarm will sound or 

flash.

-

Without any signal being transmitted into the 

monitor for 4 seconds during workout, time will 

STOP 

-

Range 0:00~99:59

Speed

-

Displays current training speed.  

Maximum speed is 99.9 0,0 ~ 99,9 KM/H - ML/H..

-

Without any signal being transmitted into the 

monitor for 4  seconds during workout, SPEED will 

display “0.0”

RPM

-

Displays the Rotation Per Minute.  

Display range 0~15~999

-

Without any signal being transmitted into the 

monitor for 4 seconds during workout, RPM will 

display “0”

WATTS

-

Display current workout watts. Range 0 ~ 999

Distance

-

Without setting the target value, distance will count 

up.

-

When setting the target value, distance will count 

down from your target distance to 0 with an alarm 

sound or flash.

-

Range 0,0 ~ 99,9 KM/H - ML/H.

Calories

-

Without setting the target value, calorie will count 

up.

-

When setting the target value, calories will count 

down from your target calorie to 0 with an alarm 

sound or flash.

-

Range 0~9999.

NOTE

•  This data is a rough guide for comparison of 

different exercise sessions which cannot be used 

in medical treatment

Pulse

-

Current pulse will display after 6 seconds when 

detected by the console.

-

Without any pulse signal for 6 seconds, console will 

display “P”.

-

Pulse alarm will sound when current pulse is over 

the target pulse.

-

Range 0-30~230 BPM

Explanation of buttons

UP

-

Increase resistance level

-

Setting selection.

DOWN

-

Decrease resistance level

-

Setting selection.

MODE

-

Confirm setting or selection.

RESET

-

In setting mode, press RESET key once to reset the 

current function figures.

-

Press RESET key and hold for 2 seconds to reset all 

function figures

START/ STOP

-

Start or Stop workout

BODY FAT

-

Test body fat% and BMI in stop mode.

RECOVERY

-

Test heart rate recovery status.

Opperation

Power on

-

Plug in power supply to power on computer. 

-

Press any key to power on the console when being 

in sleep mode..

-

Start pedalling to power on the console when being 

in sleep mode.

LCD will display all segments (fig. - F-01)

Power off

Without any signal being transmitted into the monitor 

for 4 minutes the monitor will enter SLEEP mode 

automatically. ( Active training data will be lost ) 

Workout selection

Use Dial UP/ DOWN to select: 

-

Manual 

( fig. - F-02)

-

Beginner  ( fig. - F-03)

-

Advande  ( fig. - F-04)

-

Sporty 

( fig. - F-05)

-

Cardio 

( fig. - F-06)