Tunturi Pure 3.1, User Manual

GB

O W N E R ’ S   M A N U A L

•

P U R E   R U N   3 . 1

7

USB CHARGER FUNCTION

The user can connect their device to 

charge during workout.

LCD DISPLAY

DOT MATRIX:

The 10x12 dot matrix reflects incline 

on the elevation programs (Program 

1-4, 7, 10-11) and speed on the speed 

programs (Program 5-6, 8-9) and the 

user programs.

On programs 12-15 and in the manual 

mode, the dot matrix displays a 0.4 km 

running track.

INCLINE/PULSE:

Displays pulse rate except when 

elevation is changed. To get a pulse rate, 

place both of your hands on the pulse 

grip bars. It is recommended to straddle 

the walking belt to get an accurate 

reading. If you are walking or jogging, it 

is difficult for the monitor to accurately 

read your pulse rate.

TIME/ PACE:

Shows Workout Time. Time begins at 

00:00 and counts up. The maximum time 

is 99:59. 

Pace is minutes per mile and is 

displayed when the SELECT key 

is pressed. When the safety key 

is inserted, this display shows the 

accumulated distance (odometer) for 

one second.

SPEED:

Displays the speed the treadmill belt is 

moving.

DISTANCE/ ELEVATION GAIN:

Displays the distance, in miles or 

kilometers, the treadmill belt has gone 

on the current workout.

When SELECT key is pressed during 

workout, it will display Elevation in meter, 

the user has climbed during the current 

workout.

CALORIES/ CALORIES PER HOUR:

Displays calories consumed. 

Estimated calories per hour being 

consumed is displayed when the 

SELECT key is pressed..

NOTE:

METRIC/MILES:

If you want the treadmill to display the 

values in miles, you can switch to miles 

as follows:

1.  During the power ON - manual mode, 

first hold the ENTER button then 

press the SELECT button together to 

enter the Engineering Mode.

2.  Time window shows model no., 

incline window shows software 

version, Calories window shows year. 

Time window shows date. 

3.  By pressing the ENTER button – the 

Speed window shows ISP version, 

Time window shows 001, Distance 

window shows LDU and Calories 

window shows LDU version.

4.  Press ENTER button again to enter 

KM/MILE switch mode, Press SPEED 

+ - or ELE - to select KM or 

MILE.

5.  Press ENTER button again and the 

window will show total distance.

6.  Press ENTER button again and the 

window will show total hours.

7.  Press ENTER button to go back to 

ON position.

ODOMETER:

An odometer showing accumulated 

distance will appear in the time window 

for one second when the safety key is 

placed on the monitor.

User manual Tunturi Style-Treadmill Run 3.1 20140310.indd   7

02/04/2014   20:24:11