10
Owner
’s manual • Pure Row 8.1
MAX:
This setting allows the maximum amount
of water to reach the rowing Blades
inside the tank for heaviest resistance
MIN:
Keeps a portion of the water in the
inner tank compartment, creating light
resistance.
Getting started
To achieve minimum resistance, select
MIN on the tank adjuster.
It takes 10 strokes to fill the central
(storage) tank, leaving a minimal amount
of water in the outer (active) tank. This
process is always required if minimum
resistance is desired.
Row hard at a steady pace (20 to 25
Strokes Per Minute [SPM]) and put some
effort into the stroke, ensuring that good
form is maintained.
You can make adjustments to the
resistance level while you row. Your
Tunturi rower will adapt almost instantly
to increases in resistance but will take
up to 10 strokes to reduce the effort
required, as the inner storage tank fills
up.
Once you have found a level that gives
you the exercise required, changes can
be made to the SPM and stroke intensity
to further vary your energy input.
Assembly step 11
• Secure the seat rail bolt with seat rail
bolt dampener into the lower main
frame (1).
Do not tighten the bolt (7).
The vertical seat rail tensioning bolt (7) is
designed to hold the mid leg 3-5mm off
the ground when the rower is standing
on the ground without a person on it.
During operation the mid leg will just
slightly touch the ground during a rowing
stroke.
NOTE
If excessive shaking/hopping of the tank
occurs during rowing, this indicates the
vertical seat rail tensioning bolt (7) is out
of adjustment and should be tightened.
Setting the rowing
resistance
(Adjustable water level)
The patented adjustable water level
offers a true multi-level experience.Water
is moved between the “storage” and
“active” chambers of the tank. Your new
Tunturi Rower can adapt - at the turn
of a dial - to the resistance preferred by
each user.
