Tunturi T40 User Manual Download

Page: 17 / 104

- Make sure that only one person uses the equipment at a time. The

equipment must not be used by persons weighing more
than 120 kg (265 lbs).

- Do not open equipment without consulting your dealer.

Electrical safety

(Only for equipment with electric power)

- Before use, always check that the mains voltage is the same as the

voltage on the rating plate of the equipment.

- Do not use an extension cable.

- Keep the mains cable away from heat, oil and sharp edges.

- Do not alter or modify the mains cable or the mains plug.

- Do not use the equipment if the mains cable or the mains plug

is damaged or defective. If the mains cable or the mains plug is
damaged or defective, contact your dealer.

- Always fully unwind the mains cable.

- Do not run the mains cable underneath the equipment. Do not run

the mains cable underneath a carpet. Do not place any objects on
the mains cable.

- Make sure that the mains cable does not hang over the edge of a

table.

- Make sure that the mains cable cannot be caught accidentally or

tripped over.

- Do not leave the equipment unattended when the mains plug is

inserted into the wall socket.

- Do not pull the mains cable to remove the mains plug from the wall

socket.

- Remove the mains plug from the wall socket when the equipment

is not in use, before assembly or disassembly and before cleaning
and maintenance.

⚠ CAUTION

• If voltage varies by ten percent (10%) or more, the performance

of your treadmill may be affected. Such conditions are not
covered under your warranty. If you suspect the voltage is low,
contact your local power company or a licensed electrician for
proper testing.

⚠ CAUTION

• Route the power mains cord away from any moving part of

the treadmill including the elevation mechanism and transport
wheels.

⚠ WARNING

• Never use water or any other liquid directly on or near the

equipment, but only via a damp cloth if moist is required to
clean the machine.

• Using liquid directly is harmful for the equipment’s components,

and may result in an electric shock caused by a short cut circuit.
This could result in serious personal injury or even death.

Grounding Instructions

This product must be grounded. If the treadmill’s electrical system
should malfunction or breakdown grounding provides a path of least
resistance for electric current, reducing the risk of electric shock. This
product is equipped with a cord having an equipment-grounding
plug. The plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all local codes
and ordinances.

⚠ WARNING

• Improper connection of the equipment-grounding conductor can

result in a risk of electric shock. Check with a qualified electrician
or serviceman if you are in doubt as to whether the product is
properly grounded. Do not modify the plug provided with the
product if it will not fit the outlet; have a proper outlet installed
by a qualified electrician.

Assembly instructions

Description illustration A

The illustration shows what the trainer will looks like after the
assembly is completed.
You can use this as a reference during your assembly, but do follow
the assembly steps always in the correct sequence as showed in the
illustrations.

Description illustration B

The illustration shows what components and parts you should find
when un-boxing your product.

‼ NOTE

• Small parts can be hidden/ packed in hollow spaces in the

Styrofoam product protection

• If a part is missing, contact your dealer.

Description illustration C

The illustration shows the hardware kit that comes with your product.
The hardware kit contains bolts, washers, screws , nuts etc. and the
required tools to properly fit your trainer.

Description illustration D

The illustrations shows you in the correct following order how to
assembly your trainer best.

‼ NOTE

• Part numbers shown in the assembly steps are commencing

with the spare part drawing that can be found in the online full
version user manual.

⚠ WARNING

• Assemble the equipment in the given order.
• Carry and move the equipment with at least two persons.

⚠ CAUTION

• Place the equipment on a firm, level surface.
• Place the equipment on a protective base to prevent damage to

the floor surface.

• Allow at least 100 cm of clearance around the equipment.
• Refer to the illustrations for the correct assembly of the

equipment.