Turbo Air TGM-11RV, Installation And Operation Manual

2

HOW TO INSTALL

In good ventilation.

• Place the refrigerator in

good ventilation for a good
operation.

Install the refrigerator at

indoor not to get wet from
the rain.

• This unit is designed for

indoor usage only.

Install the refrigerator on

the places with 41~95°F

.

• The stored materials could

be frozen or broken at the
degree below 41°F and
cooling efficiency could be
lower at the degree over 
95°F.

Place the refrigerator on

hard and level floor.

• Unlevel floor may cause the

refrigerator to make noise.

Avoid places that are

exposed to smoke.

• The discoloring can occur to

the refrigerator.

Set the front of the 

refrigerator a little bit
higher than back-side by
using adjustable feet to
drain the water away
easily.

Put away heat source from

the refrigerator.

• High ambient temperature

will make cooling efficiency
lower.

Place the refrigerator in an

area with low moisture.

• Splashing water or a high

moisture area may cause
short circuit and make
rusting easier.

Ajust the temperature in

the refrigerator.

• Controller is attached to the

right on the upper.

Install 
at the degree 
of 41~95

°

F

Set the front 
side higher than 
back side.

1

2

3

4

5

6

OFF

TEMP

CONTROLLER