4
■
Ventilation
- Place the refrigerator under proper ventilation
- Keep the cabinet 4” from rear wall.
■
Start-up
- Plug the power cord into the wall outlet.
- The outlet should be only for the refrigerator.
- The temperature controller should be on
normal position.
- If disconnected, shut down, wait 5 minutes
before re-starting it.
■
Warning
- It is the responsibility of the purchaser in case
of followings.
• Compressor under low voltage
• Compressor more than 7 feet from plug-in
connection.
• Compressor under unstable voltage
• Compressor not under 115V/60Hz
■
Temperature control
- To keep the temperature down : Turn the dial
CW.
- To keep the temperaure up : Turn the dial
CCW.
■
Set the shelf
- Assemble the link with support beam.
"A Part"
"B Part"
CAUTION
