22 TURBOLOCK TL114
Section 8
Resetting the Lock
• Resets cannot be reversed.
• Performing a reset will delete all passcodes including the Admin Passcode.
• Once all passcodes are erased, only the default Admin Passcode can open the lock.
• After a reset:
○
Admin Passcode will return to its default ‘123456’.
○
Choose a new Admin Passcode immediately. See Section 6.
Option 1
Step 1.
Press ‘#’ on the keypad, and enter the current Admin Passcode. Then press ‘#’ again. Voice navigation will guide you
through the process:
“To restore the default factory setting, please press 5.”
Step 2.
Press ‘5’ followed by ‘#’ before the lock’s backlight turns off. The TL114 will confirm “Restore factory settings,” then
flash three times. After the voice confirmation (“Success”), the TL114 is now reset.
Option 2
Step 1.
Remove the cover from the battery compartment at the back of the lock.
Step 2.
Press and hold the little black button above the battery compartment for ~5 seconds. The TL114 will confirm “Restore
factory settings,” then flash three times. After the voice confirmation (“Success”), the TL114 is now reset.
Inside Section
Reset Button
