TURBOLOCK TL114 7
2.3 Battery Information
The lock requires
9V alkaline
battery. New battery should be installed as soon as possible after receiving the first low-battery
warning, as indicated by a single red flash on the indicator and a voice confirmation (“Low battery. Please replace the battery.”).
After that first notification, the lock will only have enough power for approximately 50 uses before the batteries are fully depleted.
Low-battery notification will come from the lock itself.
2.4 Usage Overview
When using keypad passcodes, the TL114’s backlight will turn on. The door can only be opened while the backlight is on. After a
couple seconds of inactivity, the backlight will turn off and the TL114 will automatically lock. You can also use one of the included
physical keys to open the lock directly.
Using the Admin Passcode
Use the keypad to enter the Admin Passcode, and then press ‘#’ to unlock the door.
For added security, the Admin Passcode must be changed from the manufacturer’s default after installation and initial testing.
See Section 6.
Using the Emergency Power Port
Supply power via the Emergency Power Port on the bottom of the lock. The backlight will turn on indicating the lock is receiving
power. Enter a passcode and then press ‘#’ to unlock the door as usual.
Using a User Passcode
Use the keypad to enter the passcode, then press ‘#’ to unlock the door.
• The TL114 features a Mute Function. See Section 7.
• If a passcode has been entered wrong 5x in a row, the lock will go into a 5-minute period of inactivity where it cannot be used,
except with the included physical key. This is a security feature designed to prevent unwanted parties from using the lock
.
