11
Once all user codes are erased, only the master code will be able to operate the lock.
7.2 Hard Reset
If needed, a hard reset may be performed on the lock to erase all codes including the master code.
After a hard reset, the master code will return to its default ‘0123’ and all other codes will have been
erased. A hard reset should only be used when the master code is lost or forgotten.
To delete
all
user codes, including the master code, follow the instructions below:
1. Use a screwdriver to remove the screws from the inside knob cover.
2. Remove the cover and
3. Press and hold the reset button for
return to the manufacturer default code ‘0123’.
Section 8. Disguising Your Code
This function is an added security feature which is aimed at preventing codes being observed while
being entered.
1. Enter the first digit of the code you want to enter.
2. Randomly enter any number of digits to confuse the observer.
3. Enter the remainder of the code, followed by the ‘#’ key
Example:
Your code is ‘333’.
Enter the
Randomly enter any digits to confuse the observer.
Enter the remainder of the code: ‘33’ and press ‘#’.
find the reset button located on the battery pack.
five seconds until three beeps are heard. The master code will
first digit: ‘3’.
