14
Step 4. Install Strike
Close door and mark horizontal centre of latch on to door
frame. Mark vertical line where door edge meets frame and
measure in half of door thickness to find vertical centre.
(Fig. 4a)
Extend both lines until they intersect and drill a 1 in. hole
to 0.1 in. depth.
Position strike plate and mark around edge.
Chisel frame to approx 0.1 in. depth or until strike sits
flush.
Drill 2 x 0.1 in. screw holes and fix strike to frame.
(Fig. 4b)
Step 5. Install Outside
Knob
Feed the power cable
through latch and guide
spindle through until
outside rose sits flush.
Step 6. Install Inside
Knob
hole in knob and guide
spindle into handle.
(Fig 6a)
outside knob using
mounting screws.
(Fig. 6b)
Step 7. Plug in Battery
Box
Insert power cable into
battery box and position
box in line with cover
screw holes.
Step 8. Install Inside
Cover Plate
battery box and align
with screw holes.
cover plate to inside
knob.
