2
ABOUT YOUR SPRING CHANGER
The Spring changing tool by Turbosmart is designed to be compatible with most Turbosmart products that requires changing the
springs for tuning purposes, quick release pins allow quick height adjustments to suit smaller or larger products
Benefits include:
•
Concentric base plate
•
Quick release pins for height adjustment
•
Non-marring head
•
Table mountable or Vice
Assembly Pins
Pull out to adjust overall
size of device
Plastic Mandrel
Base Plate
Hole for mounting to a bench.
Figure 2
– Spring Changer Overview
12mm HEX
Use a 12mm socket or
spanner to compress the cap
Base
Concentric rings for holding part
concentric with compressor
shaft
