6
7
A
B
D
H
G
F
B
H
I
I
C
E
A - Operate the unit only with the bonnet properly
closed.
B - Operate the unit only with the vibrating sieve proper-
ly positioned.
C - Check that the grill on the hopper is properly fixed.
For no reason the machine has to work without this
safety device.
D - The mixer is fixed with safety grill on top.
The opening of the above mentioned grill will
determine the immediate block of the mixer.
E - The machine must never pump material when not
connected to the hoses and to the spray gun.
F - Warning, check that no one is standing too close to
the air group valve.
G - The spray gun should not be directed towards
people. In case of blockage of the gun, no one
should look directly into the hose of the deflector.
The sudden exit of the blocked part or of mortar
under pressure, may cause problems to the sight.
H - Moving parts and hot parts are present inside the
canopy as well as battery acids.
I - Do not remove any protection.
L - Before disconnectiong the material hose couplings
or the spraygun, make sure that the pressure on
the pressure gauge is equal to 0 (zero) and that no
pressure is still present in the hoses.
M - Use gloves in nitrile for protection against cuts
and abrasions, preferably models with CE 940072
certificate and googles that can provide a total
protection to the eyes, with infrangible and
anti-fogging lenses (in policarbonate and vinyl
chloride).
3 - CAUTION AND OTHER HAZARDS
3.1 - CAUTION AND OTHER HAZARDS
L
Summary of Contents for UNI 30 D
Page 4: ...4 ...