38
TBV123 / TBV123-AN and TBV118L / TBV118L-AN Rigging Manual
Procedure 9.1 - Pole mounting a TBV123 cabinet on a TBV118L subwoofer
1.
Screw the pole into the top of the TBV118L subwoofer using the M20
threaded attachment, and make sure it is tight and secure.
2.
Carefully position the TBV123 cabinet until one of its mounting holes fits
over the top of the pole, then lower it fully down onto the pole.
3.
There are two holes to choose from; the front hole allows the TBV123
cabinet to tilt down.
Double check that the assembly is secure on the
TBV118L subwoofer, and that the TBV123 cabinet is
fully mounted all the way onto the pole.
4.
A maximum of 2 TBV123 cabinets can be pole mounted.
!
!
WARNING
DO NOT EXCEED A TOTAL QUANTITY OF 2 TBV123 and 1 or 2 TBV118L CABINETS FOR
THIS GROUND STACK CONFIGURATION. FAILURE TO FOLLOW INSTRUCTIONS MAY
CAUSE PERMANENT INJURY OR DEATH.
5.
If a second TBV123 cabinet is used, double check that all pins are correctly
inserted, and that the 2 TBV123 cabinets are securely connected together
before fitting them onto the pole.
For most applications, the forward socket of the dual angle TBV123 pole
socket should be used. This will tilt the lower of the two speakers 15° down
to provide coverage for the near listeners while the upper speaker will face
straight out to cover more distant audience members. As a visual coverage
check, listeners should not be able to see the bottom or top surfaces of the
two-speaker array.
!
!
WARNING
FOR GROUND STACKED CONFIGURATIONS OF 2 TBV123 CABINETS PLUS 1 OR
2 TBV118L SUBWOOFERS, THE STACKED SYSTEM MUST BE SECURED TO THE
STACKING PLATFORM USING RATCHET STRAPS OR GUY WIRES. FAILURE TO FOLLOW
INSTRUCTIONS MAY CAUSE PERMANENT INJURY OR DEATH.
6.
Disassembly is the reverse of assembly.
Summary of Contents for TBV118L-AN
Page 50: ......
