Quick Start Guide
TCS series
TCS Series Quickstart Guide - Page - 3
Networking multiple devices to a PC: BvNet is the method of connecting multiple devices – these can be controllers
and/or powered TCS loudspeakers – and this is done with the Linea Research USB & RS232 Interface (available from
Turbosound). The interface enables devices to be connected to a PC either using RS232 or using USB. EIA485 is the
network protocol among the networked devices and is carried over CAT5-type cables. Minimum system requirements
are: PC with Pentium processor, Windows NT, 2000, XP, or Vista, CD ROM drive or internet access, RS232 or USB port.
RS232: Connect your computer to the BvNet interface using a standard 9-pin serial cable. External power is required
for RS232 operation and this should be supplied by the Linea Research Accessory Power Supply.
USB: Connect your computer to the BvNet interface using a USB Type A to USB Type B cable. External power is not
required when using USB.
Connect networked devices via RJ45 CAT5 cables.
Launch the TurboDrive™ software.
Application Authorisation: TurboDrive™ prompts for an Authorisation Code on the first launch which is PJLUWZ.
Select the COM port from Network > Com Port.
Click the Online toolbar button.
Click on one of the devices that appear in the tree view to Launch the panel.
When the progress bar indicates
ready,
adjust the controls as required.
Please refer to the TurboDrive™ User Guide for further information on networking.
