ASSEMBLY INSTRUCTIONS
1. Install the front and rear stabilizers
Loose the screws in the stabilizer (No.15 and 52), and insert them into the corresponding
grooves and tighten with the nuts or bolts in each stabilizer.
2. Install the stand tube
Loose the screws in the stand tube (No.2).
Connecting the adjustor (No.5) with its wire
(No.83), and upper sensor wire (No.81) and lower
senor wire (No.82), and then place the stand tube
onto the main frame and fasten.
15
52
10
50
11
2
5
1
0
8
3
8
1