V04.00 | 2021/05
233
14.10 Technical data – TBEN-S2-4AI
The module provides four analog inputs, which can be configured as voltage, current, RTD or
thermo couple input.
Technical data
Power supply
Operating current
V1: min. 100 mA, max. 240 mA
Sensor/actuator supply VAUX1
Supply connector C0…C3 from V1
-circuit proof, 1 A per group C0…C3
Potential isolation V1/V2/Ethernet
Galvanic isolation from V1 and V2 voltage group,
voltages up to 500 VDC
Power loss of the device, typical
Max. 5 W
Analog inputs
Number of channels
4
Operating Modes
n
Voltage
n
Current
n
RTD
n
Resistance
n
Thermocouple
Resolution
16 bit
Data format
n
Standard 16 bit/12 bit left justified
n
NE43
n
Extended range
Operation mode voltage
Input filter
Standard, smooth, fast, off
Max. input voltage
11.85 V
Load resistance
> 100 kΩ
Input signals
Differential, differential without ground, single ended
Measurement range
0…10 V, -10…10 V, 2…10 V,
0…5 V, 1…5 V, -1…1 V, -500…500 mV,
-100…100 mV, -50…50 mV
Mains suppression
Off, 50 Hz, 60 Hz
Cycle time
≤ 4 ms
Basic error at 25 °C
< 0,1 %
Repeatability
0.015 %
Temperature coefficient
< 100 ppm/°C of full scale
Measurement error total (FSR)
< 0,75 %
Operation mode current
Input filter
Standard, smooth, fast, off
Max. input current
23 mA
Burden resistance
< 50 Ω
Input signals
Differential, differential without ground, single ended
Measurement range
0…20 mA, 4…20 mA, -20…20 mA
Mains suppression
Off, 50 Hz, 60 Hz
Cycle time
≤ 4 ms
Basic error
< 0,1 %
