Commissioning
42
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
7.2.3
RFID test – Main menu
Fig. 43: RFID Test – Main menu
Icon
Function
Description
Start trigger/ON
Starts the trigger for command execution
Stop trigger/OFF
Closes the trigger for command execution
Switch on antenna
Switches on the read/write head antenna
Switch off antenna
Switches off the read/write head antenna. Trigger commands
are ignored.
Configure message content
Displays the content to be transferred with a read operation.
The following can be selected:
n
Phase
n
RSSI
n
Socket
n
Time
Switch mode (report/polling)
Switches between Report mode (automatic read/write) and
polling mode (read/write started through an explicit polling
command)
Read read/write head
Calls the following information from the read/write head and
provides the information in the
Logger
window:
n
Read/write head status
Read read/write head version
Calls the following information from the read/write head and
provides the information in the
Logger
window:
n
Hardware revision
n
Firmware status
n
Serial number
Reset read/write head
Offers three ways of resetting the read/write head:
n
Voltage reset
n
Factory reset: Reset to factory settings
n
Reset read/write head status
HF diagnostics
Opens the window to the HF diagnostics
Summary of Contents for TN-UHF LNX Series
Page 1: ...Your Global Automation Partner Instructions for Use TN UHF LNX UHF Read Write Head ...
Page 2: ...2 Hans Turck GmbH Co KG T 49 208 4952 0 F 49 208 4952 264 more turck com www turck com ...
Page 75: ...V01 00 2019 04 75 Select RS485 RFID and confirm with OK Fig 62 Selecting the RS485 interface ...