V02.00 | 2021/02
7
3
For Your Safety
The product is designed according to state-of-the-art technology. However, residual risks still
exist. Observe the following warnings and safety notices to prevent damage to persons and
property. Turck accepts no liability for damage caused by failure to observe these warning and
safety notices.
3.1
Intended use
These devices are designed solely for use in industrial areas.
The passive BL ident tags are designed for contactless write and read operations from several
BL ident HF read/write heads with an operating frequency of 13.56 MHz. The TW…-M-… tags
are suitable for mounting in and on metal. The achievable read/write distances may vary ac-
cording to factors such as component tolerances, mounting locations, ambient conditions and
the effect of materials. For this reason, the application must be tested under real conditions
(particularly with read and write operations in motion).
The devices may only be used as described in these instructions. Any other use is not in accord-
ance with the intended use. Turck accepts no liability for any resulting damage.
3.2
General safety notes
n
The device may only be assembled, installed, operated, parameterized and maintained by
professionally-trained personnel.
n
The device may only be used in accordance with applicable national and international regu-
lations, standards and laws.
n
The device only meets the EMC requirements for industrial areas and is not suitable for use
in residential areas.