Operation
the machine and cause a loss of control. Follow
directions for counter weights.
•
If you lose control of the machine, step off and
away from the direction of travel of the machine.
Starting the Engine
1.
Ensure the motion control lever is in the neutral
position.
2.
Push forward on the parking brake lever to engage
the parking brake.
3.
Place the throttle midway between the “SLOW”
and “FAST” positions.
4.
On a cold engine, pull the choke knob upward
into the “ON” position.
On a warm engine, leave the choke pushed down
in the “OFF” position.
5.
Turn ignition switch to the “START” position.
Release the switch as soon as the engine starts.
Important:
Do Not crank the engine
continuously for more than ten seconds at a
time. If the engine does not start, allow a 60
second cool-down period between starting
attempts. Failure to follow these guidelines
can burn out the starter motor.
6.
If the choke is in the “ON” position, gradually
return choke to the “OFF” position as the engine
warms up.
Driving the Machine
CAUTION
Machine can spin very rapidly by positioning one
lever too much ahead of the other. Operator may
lose control of the machine, which may cause
damage to the machine or injury.
•
Use caution when making turns.
•
Slow the machine down before making sharp
turns.
Important:
To begin movement (forward or
backward), the brake lever must be disengaged
(pulled up) before the motion control lever can
be moved.
g313930
Figure 16
1.
LH Motion control lever
5.
Forward
2.
RH Motion control lever
6.
Neutral
3.
Front reference/Speed
control bar
7.
Reverse
4.
Front of the machine
Driving Forward
1.
Make sure the motion control lever is in the
neutral position.
2.
Release the parking brake.
3.
To move forward in a straight line, move both
levers forward with equal pressure.
g016672
Figure 17
To turn left or right, pull the motion control lever
back toward neutral in the desired turn direction.
26
