Safety
Safety and Instructional Decals
•
Keep all safety signs legible. Remove all grease,
dirt and debris from safety signs and instructional
labels.
•
Replace all worn, damaged, or missing safety
signs.
•
When replacement components are installed, be
sure that current safety signs are affixed to the
replaced components.
•
If an attachment or accessory has been installed,
make sure current safety signs are visible.
•
New safety signs may be obtained from
your authorized Z Turf Equipment dealer or
distributor.
•
Safety signs may be affixed by peeling off the
backing to expose the adhesive surface. Apply
only to a clean, dry surface. Smooth to remove
any air bubbles.
•
Familiarize yourself with the following safety signs
and instruction labels. They are critical to the safe
operation of your Z Turf Equipment commercial
spreader-sprayer.
decal106-5517
106-5517
1.
Warning—do not touch the hot surface.
decal126-2055
126-2055
1.
Wheel lug nut torque 95 ft-lb (129 N-m) (4x)
2.
Wheel hub nut torque 235 ft-lb (319 N-m)
3.
Read and understand the Operator’s manual before
performing any maintenance, check torque after first
100 hours then every 500 hours thereafter.
decal135-6398
135-6398
1.
Read the
Operator’s
Manual
.
3.
Only use blue-colored
10W-50 engine oil.
2.
Only use green-colored
15W-50 hydraulic fluid.
decal135-6424
135-6424
6
