8
85872 RevA
TURFCO T3000 APPLICATOR
Turfco T3000 Applicator Operator Driving Controls
(See Figure 2)
Before driving the applicator become familiar with the operator controls.
A. PARKING BRAKE LEVER
B. FREEWHEEL LEVER
C. ENGINE THROTTLE CONTROL
D. FORWARD/REVERSE SPEED CONTROL
E. GROUND SPEED LOCK
F. STEERING WHEEL
G. OPTIONAL ELECTRIC START
Take time to become
familiar with all the controls
before you attempt to drive
this machine.
Become comfortable with
the reach and movement
of the Speed controls, the
Steering Wheel and the
locations of the Engine
Throttle, Freewheel Lever,
and Parking Brake.
FREEWHEEL
LEVER
PARKING
BRAKE
LEVER
ENGINE
THROTTLE
CONTROL
STEERING
WHEEL
GROUND
SPEED
LOCK
PEDAL
FORWARD/REVERSE
SPEED CONTROL
OP85872-02
FIGURE 2
OPTIONAL
ELECTRIC
START
OPERATION
Before Operating the T3000 Applicator and Before Starting the Engine,
1. Read the Operators Manual and Watch the Operation CD.
2. Check the oil in the engine.
3. Check air pressure in the front and rear tires. Inflate to PSI shown on tire.
3. Fill the machine with fresh approved gasoline.
4. Inspect the machine for any loose nuts, bolts or hardware or anything that does not look normal.
5. Check all guards and covers to make sure they are secure.
6. Become familiar with the controls. Stand on the operators platform and test operate all the driving
controls.
7. Do not start the engine - you are not ready yet.
safe-06
WARNING
Warning: Driving the T3000
Applicator without training and
practice can cause damage to the
machine and injure the operator.
OPERATION
It may take several hours
of practice before one has
the skill level required to
properly applicate a lawn.
Operation of the T3000
Applicator before one has
developed the proper skill
level can cause damage
to the machine, operator
or the lawn.
