84
END OF SEASON STORAGE SERVICE
CLEAN THE ENTIRE MACHINE AND
ENGINE
Thoroughly clean the machine and engine then blow
dry with 50 PSI compressed air.
ENGINE SERVICE
1. Refer to the engine manufactures manuals for
specific recommendations and procedures.
2. Drain the fuel tank.
3. Run the engine until the carburator runs out of
fuel and the engine stops running.
MACHINE SERVICE
1. Lubricate all grease point as shown in the
Lubrication Section.
2. Lubricate all linkage pivot points.
3. Spray exposed cables with a fluid lubricant to
prevent binding and rust.
4. Examine belt for damage and replace as
required.
5. Check the condition of all shields and replace as
required.
6. Check safety decals and replace as required.
7. Check all bearing for bearing condition. Replace
any loose bearings.
8. Check condition of the blade and replace as
required.
9. Clean the bottom of the deck to prevent the deck
from rusting.
Summary of Contents for 1305B
Page 1: ...OPERATOR S MANUAL MODEL 1305BC BRUSH CUTTER ...
Page 89: ......
Page 90: ...BC02 1009 Printed in U S A ...
