3
DE
FR
DE
IT
GB
Overload protection
lf the motor switches itself off while the appliance is being used, the over-
load protection feature has been activated. Possible causes:
– the food has jammed the blender blade,
– too much pressure exerted on the food during the cutting process.
Eliminate the cause and switch on the appliance again.
After using the appliance / Cleaning
Caution!
–
Never immerse the basic appliance or the battery charger in
water and do not clean in the dishwasher.
– Remove the plug of the battery charger.
– Wipe the basic appliance and the charger with a moist cloth and then dry
them.
– The blending cup can be washed in the dishwasher (upper tray/basket).
– Clean the blender with a brush under running water or in the
dishwater (upper tray).
– Dry the blender foot in an upright position (blender blade face up)
so that any trapped water can run out.
Note:
– When preparing red cabbage for ex., red stains may appear on the
plastic parts that can be removed using a few drops of food oil.
– In case the appliance isn’t used for a long time unplug it from the socket.
Use
This appliance is designed for domestic and not industrial use. Use the appli-
ance for processing normal quantities of food for domestic use.
Please retain the operating instructions. If passing on the appliance to
a third party, always include the operating instructions.
Lithium-Ion Battery
The appliance is equipped with a high power lithium-ion battery that
provides the following advantages:
– maximum power even when the battery is almost empty.
– short charging time.
– no memory effect. After each use it can be completely recharged without
self-discharging.
– power remains the same even if the appliance has not been used for a long
time.
