8
Figure 16
Figure 17
11. OPERATING
INSTRUCTIONS
Restore power to ceiling fan and test for proper
operation.
A.
HI, MED,
and
LOW
buttons:
These three buttons are used to set the fan
speed as follows:
HI= high speed
Med= medium speed
Low= low speed
B.
OFF
button:
This button turns the fan off.
C.
LIGHT
button:
This button controls the light. Press and release the
button to turn the light ON or OFF. Press and hold
the button to set the desired brightness. The light
key has an auto-resume, it will stay at the same
brightness as the last time it was turned off.
The Reverse switch is located on the top of the
motor housing. Reverse the switch to the Left for
warm weather operation. Slide the switch to the
Right for cool weather operation.
Speed settings for warm or cool weather depend
on factors such as the room size. Ceiling height,
number of fans and so on.
NOTE:
Wait for fan to stop before changing the
setting of the slide switch.
10. INSTALLING THE
BATTERY
Install 9 volt battery (included), to prevent damage
to transmitter, remove the battery if not used for
long periods. (Fig. 16)
9 Volt Battery
LOW
OFF
HI
MED
