8
Turn of the Century
TM
Bulb
ASSEMBLY INSTRUCTIONS
16
15
13. Secure the blade arm to the underside of the motor
using the motor screws removed in Step 11. Secure each
blade arm to the motor before moving to the next.
Note:
The notch in the fitter plate allows a Phillips
screwdriver access to the motor screws.
To install the fan without the light kit, skip to step 17
.
14. Remove the three fitter plate screws from the fitter
plate. Then, connect the single-pin connectors from the
fitter plate to the light kit -- white to white and blue to
black.
Secure the light kit to the fitter plate using the three fitter
plate screws.
15. Remove the socket ring from the socket. Lift the
glass shade onto the socket and secure with socket ring.
Repeat for each socket.
14
Motor
Screw
Single-pin
Connectors
Socket
Socket Ring
Glass
Shade
Light Kit
Blade Arm
Notch
Motor
Fitter Plate
Fitter Plate Screw
Fitter Plate
13
16. Install the three candelabra-base bulbs (60W max.) into
the sockets of the light kit.
